[Solved] Configure Flask dev server to be visible across the network

Solution #1:

While this is possible, you should not use the Flask dev server in production. The Flask dev server is not designed to be particularly secure, stable, or efficient. See the docs on deploying for correct solutions.

Add a parameter to your app.run(). By default it runs on localhost, change it to app.run(host="0.0.0.0") to run on all your machine’s IP addresses. 0.0.0.0 is a special value, you’ll need to navigate to the actual IP address.

Documented on the Flask site under “Externally Visible Server” on the Quickstart page:

Externally Visible Server

If you run the server you will notice that the server is only
available from your own computer, not from any other in the network.
This is the default because in debugging mode a user of the
application can execute arbitrary Python code on your computer. If you
have debug disabled or trust the users on your network, you can make
the server publicly available.

Just change the call of the run() method to look like this:

app.run(host="0.0.0.0")

This tells your operating system to listen on a public IP.

Solution #2:

If you use the flask executable to start your server, you can use flask run --host=0.0.0.0 to change the default from 127.0.0.1 and open it up to non local connections. The config and app.run methods that the other answers describe are probably better practice but this can be handy as well.

Externally Visible Server If you run the server you will notice that
the server is only accessible from your own computer, not from any
other in the network. This is the default because in debugging mode a
user of the application can execute arbitrary Python code on your
computer.

If you have the debugger disabled or trust the users on your network,
you can make the server publicly available simply by adding
–host=0.0.0.0 to the command line:

flask run –host=0.0.0.0 This tells your operating system to listen on
all public IPs.

Reference: http://flask.pocoo.org/docs/0.11/quickstart/

Solution #3:

Try this if the 0.0.0.0 method doesn’t work

Boring Stuff

I personally battled a lot to get my app accessible to other devices(laptops and mobile phones) through a local-server. I tried the 0.0.0.0 method, but no luck. Then I tried changing the port, but it just didn’t work. So, after trying a bunch of different combinations, I arrived to this one, and it solved my problem of deploying my app on a local server.

Steps

1. Get the local IPv4 address of your computer.
   This can be done by typing ipconfig on Windows and ifconfig on Linux
   and Mac.

Please note: The above step is to be performed on the machine you are serving the app on, and on not the machine on which you are accessing it. Also note, that the IPv4 address might change if you disconnect and reconnect to the network.

2. Now, simply run the flask app with the acquired IPv4 address.

   flask run -h 192.168.X.X

   E.g. In my case (see the image), I ran it as:

   flask run -h 192.168.1.100

On my mobile device

Optional Stuff

If you are performing this procedure on Windows and using Power Shell as the CLI, and you still aren’t able to access the website, try a CTRL + C command in the shell that’s running the app. Power Shell gets frozen up sometimes and it needs a pinch to revive. Doing this might even terminate the server, but it sometimes does the trick.

That’s it. Give a thumbs up if you found this helpful.?

Some more optional stuff

I have created a short Powershell script that will get you your IP address whenever you need one:

$env:getIp = ipconfig
if ($env:getIp -match '(IPv4[sa-zA-Z.]+:s[0-9.]+)') {
    if ($matches[1] -match '([^a-zs][d]+[.d]+)'){
        $ipv4 = $matches[1]
    }
}
echo $ipv4

Save it to a file with .ps1 extension (for PowerShell), and run it on before starting your app. You can save it in your project folder and run it as:

.getIP.ps1; flask run -h $ipv4

Note: I saved the above shellcode in getIP.ps1.

Cool.?

Solution #4:

Add below lines to your project

if __name__ == '__main__':
    app.debug = True
    app.run(host = '0.0.0.0',port=5005)

Solution #5:

If your cool app has it’s configuration loaded from an external file, like in the following example, then don’t forget to update the corresponding config file with HOST=”0.0.0.0″

cool.app.run(
    host=cool.app.config.get("HOST", "localhost"),
    port=cool.app.config.get("PORT", 9000)
)            

Solution #6:

Check whether the particular port is open on the server to serve the client or not?

in Ubuntu or Linux distro

sudo ufw enable
sudo ufw allow 5000/tcp //allow the server to handle the request on port 5000

Configure the application to handle remote requests

app.run(host='0.0.0.0' , port=5000)


python3 app.py & #run application in background

Solution #7:

If you’re having troubles accessing your Flask server, deployed using PyCharm, take the following into account:

PyCharm doesn’t run your main .py file directly, so any code in if __name__ == '__main__': won’t be executed, and any changes (like app.run(host="0.0.0.0", port=5000)) won’t take effect.

Instead, you should configure the Flask server using Run Configurations, in particular, placing --host 0.0.0.0 --port 5000 into Additional options field.

More about configuring Flask server in PyCharm

Solution #8:

You can also set the host (to expose it on a network facing IP address) and port via environment variables.

$ export FLASK_APP=app.py
$ export FLASK_ENV=development
$ export FLASK_RUN_PORT=8000
$ export FLASK_RUN_HOST=0.0.0.0

$ flask run
 * Serving Flask app "app.py" (lazy loading)
 * Environment: development
 * Debug mode: on
 * Running on https://0.0.0.0:8000/ (Press CTRL+C to quit)
 * Restarting with stat
 * Debugger is active!
 * Debugger PIN: 329-665-000

See How to get all available Command Options to set environment variables?

Solution #9:

Go to your project path on CMD(command Prompt) and execute the following command:-

set FLASK_APP=ABC.py

SET FLASK_ENV=development

flask run -h [yourIP] -p 8080

you will get following o/p on CMD:-

• Serving Flask app “expirement.py” (lazy loading)
  • Environment: development
  • Debug mode: on
  • Restarting with stat
  • Debugger is active!
  • Debugger PIN: 199-519-700
  • Running on http://[yourIP]:8080/ (Press CTRL+C to quit)

Now you can access your flask app on another machine using http://[yourIP]:8080/ url

Solution #10:

For me i followed the above answer and modified it a bit:

1. Just grab your ipv4 address using ipconfig on command prompt
2. Go to the file in which flask code is present
3. In main function write app.run(host=”your ipv4 address”)

Eg:

Solution #11:

I had the same problem, I use PyCharm as an editor and when I created the project, PyCharm created a Flask Server. What I did was create a server with Python in the following way;

basically what I did was create a new server but flask if not python

I hope it helps you

Solution #12:

This answer is not solely related with flask, but should be applicable for all cannot connect service from another host issue.

1. use netstat -ano | grep <port> to see if the address is 0.0.0.0 or ::. If it is 127.0.0.1 then it is only for the local requests.
2. use tcpdump to see if any packet is missing. If it shows obvious imbalance, check routing rules by iptables.

Today I run my flask app as usual, but I noticed it cannot connect from other server. Then I run netstat -ano | grep <port>, and the local address is :: or 0.0.0.0 (I tried both, and I know 127.0.0.1 only allows connection from the local host). Then I used telnet host port, the result is like connect to .... This is very odd. Then I thought I would better check it with tcpdump -i any port <port> -w w.pcap. And I noticed it is all like this:

Then by checking iptables --list OUTPUT section, I could see several rules:

these rules forbid output tcp vital packets in handshaking. By deleting them, the problem is gone.

Solution #13:

Create file .flaskenv in the project root directory.

The parameters in this file are typically:

FLASK_APP=app.py
FLASK_ENV=development
FLASK_RUN_HOST=[dev-host-ip]
FLASK_RUN_PORT=5000

If you have a virtual environment, activate it and do a pip install python-dotenv .

This package is going to use the .flaskenv file, and declarations inside it will be automatically imported across terminal sessions.

Then you can do flask run

Solution #14:

go to project path
set FLASK_APP=ABC.py
SET FLASK_ENV=development

flask run -h [yourIP] -p 8080
you will following o/p on CMD:-
* Serving Flask app “expirement.py” (lazy loading)
* Environment: development
* Debug mode: on
* Restarting with stat
* Debugger is active!
* Debugger PIN: 199-519-700
* Running on http://[yourIP]:8080/ (Press CTRL+C to quit)

Solution #15:

If none of the above solutions are working, try manually adding “http://” to the beginning of the url.

Chrome can distinguish “[ip-address]:5000” from a search query. But sometimes that works for a while, and then stops connecting, seemingly without me changing anything. My hypothesis is that the browser might sometimes automatically prepend https:// (which it shouldn’t, but this fixed it in my case).